Bypass Oil Filtration Unit
Bypass Oil Filtration Unit
Bypass Filter System is a bypass oil filtration system that passes only a small portion of the total oil flow through a very dense filter cartridge at about 3 to 4 litres per minute. At this speed, it is possible to remove particles down to 1 micron (3 absolute) and remove 99.95% of all water, greatly decreasing wear and prolonging oil life. DESTINY INTERNATIONAL can eliminate water and particle contamination, extend oil life up to 5 times and hydraulic oil up to 10 times, reduce engine wear and component wear, dramatically reduce downtime, remove particles down to 1 micron (3 absolute), and is applicable to engines as well as hydraulic systems.
Destiny International filtration unit is made of cast aluminum with a galvanized steel mounting bracket.
There are few basic sizes, which are installed according to the applications.
It is connected to the engine lubricating oil circulating system in a bypass loop using high pressure braided hose and fittings to SAE standards.
Some model of cellulose depth filters manufactured around the world:
• M-Series, E- Series, E-Series and more... • A-Filters Inserts, B- Filters Inserts and more... • SDC1888, Water glycol filter SDPC 2088, cartridge sdc 1888 depth filters and more… • Destiny International - India, 200HE, 100 Series, 50 Series, 30 Series and equivalents • SDU-H350BM2, HDU-H300, SDU-H350RK, 2S-350-C4, 4S-350-C8, 6S-350-C12, SDU-H8, HDU-H8, LDU-H8, CFU-10, CFU-10-PG, SDU-M8, HDU-M8, LDU-M8, HDU-H8FL, HDU-H300FL2, SDU-H8FL, SDU-H350BM2-FL, SDU-H8UW-S, SDU-H350UW-S
Hydraulic Bypass Filtration Unit
The Hydraulic Bypass Filtration Unit can be fitted as single or multiple units, dependant on the volume of oil in the system. This high pressure oil filter can be fitted on the bypass basis to hydraulic systems, compressors, or any system with oil at pressure up to 3000psi. The flow is controlled to approximately 4 litres per minute at 40psi. This rate is low enough to have negligible effect on most system pressures, yet high enough to ensure that the oil is kept in an as new condition.
200HE
- Good for the Environment.
- Reduces Time Needed for Service.
- Continuous Protection Provided.
- Removes Dirt and Contaminants.
- Desirable Elements Retained.
- Extends Drain Intervals.
