Destiny International

HF Series Filtration system -HF filters are designed for high efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from compressed air systems. To meet the required compressed air quality appropriate filter element (B, P, R, M, S, A) must be installed into filter housing. Optional external condensate drains should be used for efficient condensate draining from filter housing.The HF series is a robust and sturdy filtration system designed for continuous industrial oil filtration or intermittent oil transfer.

Fitted for long high-quality filter housings with flexible filter selection from wire mesh to fiberglass filters to obtain cleanliness down to ISO CODE 14/12/9-13/11/8

The Hf series removes larger particles in the suction stage and finer particles in stages two and three.

Introduction of water removal bag filter housing removes routine moisture in circulation.

Oil cleaning applications requiring bulk flow through ultra-fine fiberglass media

Micron ratings-5/10/40-micron absolute.

TAN REDUCTION -with special activated alumina cartridge

  • General Industrial Applications
  • Automotive
  • Electronics
  • Food And Beverage
  • Chemical
  • Petrochemical
  • Pet
  • Paint
  • Marine & Offshore
  • Oil Rigs
  • Power Generation
  • Construction & Mining
  • Hydraulic Equipment
  • Transmission
  • Industrial Equipment


  • Powerful flow rate options of 45 L/min or 54 L/min Ideal for use with high viscosity oils
  • Large filter housings for continuous filtration
  • Two filter housings are fitted offering the possibility of staged filtration
  • Uses standard 415 v mains electric
  • Off-line contamination control
  • Cleanliness level down to ISO cleanliness code 14/12/9-13/11/8
  • Rugged frame with an integral drip tray to prevent spill
  • Portable, perfect for mobile use
  • All-terrain rugged wheels
  • Safety eliminate oil drain
  • Reduced frictional wear
  • Reduced new oil purchases up to 90%
  • Reduced oil – related maintenance cost
  • Improved oil circulation
  • Reduced equipment downtime
  • Decreased sludge and varnish deposits
  • Cooler running engines / equipment
  • Increased engine efficiency
  • Payback typically in less than one year
  • Oil disposal problems eliminated
  • Controlled oil viscosity
  • Rugged design for all application
  • Small footprint
  • Easy to transport on all surfaces
  • Increased dirt-holding capacity-for fiberglass media
  • Staged filtration possibilities to reduce element change out
  • Clogging indicator for visual indication
  • Flexible filter element selection – water removal option available
  • Low-cost replacement cartridges
  • A range of element micron ratings is available
  • Easy element changeover
  • Perfect for replenishing systems with filtered oil, end of production line flushing, and emptying waste oil quickly
  • Low-cost consumables available in a range of micron rating
  • Simple filter element changeover
  • Rugged Design 
  • Low Initial consumable costs
  • Easy to transport 
  • Simple to use
  • Perfect for replenishing systems with filtered oil and small scale oil polishing 

The contaminated oil enters a magnetic conditioner to remove ferrous particles. The oil is pumped through a metering jet to the tightly compressed cellulose fibre filter element, where all solids down to 1 micron and below are captured, while neutralizing acids and sulphur compounds. The filtered oil then enters the heated evaporation chamber, where water particles are evaporated and vented out. The clean oil is then gravity fed back to the tank.

Oil reclamation saves an estimated 40%-60% when compared to replacing your oil with new oil. Using our state of the art oil reclamation technology, equipment and knowledge, these are a few of the oils we can reclaim:

  • Reclamation of Hydraulic Oil
  • Reclamation of Turbine Oil
  • Reclamation of Cutting Oil
  • Reclamation of Lube Oil
  • Reclamation of Gear Oil
  • Reclamation of Industrial Gear Oil
  • Reclamation of Rust Preventive Oil

Ready to take your business to the next level?

We are Manufacturer, Supplier, Exporter, Services of HF Series Hydraulic Filtration Skid product , HF Series Filtration systemREMOVES WATER & FERROUS PARTICLESRemoves 100% Solid Contaminants

Get in touch today and receive a complimentary consultation.

Any Question ? Find out more about


error: Content is protected !!
Scroll to Top