Not traders. Not importers. We are manufacturers with a Gujarat-sized commitment to quality.
Ahmedabad is Gujarat’s industrial heartbeat. From the massive textile mills of Naroda to the precision pharma machinery of Sanand, from the chemical plants of Vatva to the engineering units of Odhav — every gearbox, every hydraulic power pack, every lubrication circuit demands one thing: surgically clean oil. As a specialist oil filtration system manufacturer in Ahmedabad, we design and build advanced filtration solutions for hydraulic oil, gear oil, and industrial lubrication systems. Whether you need a compact kidney loop unit for a single CNC or a centralised lubrication filtration skid for an entire plant, we manufacture it here — and we ship across India.
When you choose a local Ahmedabad manufacturer, you get advantages no out-of-state supplier can match:
- Made in Ahmedabad — Our design, fabrication, assembly, and testing happen here. You can visit our workshop, see your system being built, and witness the factory acceptance test.
- Faster delivery to Gujarat hubs — Naroda, Vatva, Odhav, Sanand, Changodar, Kadi, Mehsana — we deliver in days, not weeks.
- Instant spares & service — A pump seal or filter element needed urgently? Pick it up same day from our Ahmedabad stock.
- Designed for local conditions — High Gujarat temperatures, dusty environments, 24×7 shift operations — our systems are built for this reality.
- Gujarati-speaking technical team — Communication is clear, service is personal, understanding is deep.
Your CNC, press, or moulding machine drinks oil. Make sure it’s pure.
Hydraulic systems are the muscles of your plant. And dirty oil is the silent arthritis that cripples them. Our Ahmedabad-manufactured hydraulic oil filtration systems remove solid particles, water, and varnish, ensuring your machines perform at peak efficiency — day after day, year after year.
Tamari factory mate, tamara j sheher ma banyu filtration system
Your injection moulding machine doesn’t need new oil. It needs clean oil
Types We Manufacture:
| System Type | Application | Flow Rate |
|---|---|---|
| Portable Oil Filtration Systems | CNC, VMC, HMC, injection moulding, hydraulic presses | 10 LPM to 20 LPM |
| Electrostatic Varnish Remover | Servo-hydraulic systems, high-precision machinery | 5 LPM to 15 LPM |
| Mobile Filtration Cart | Multi-machine polishing, maintenance departments | 10 LPM to 20 LPM |
| Dedicated Oil Filtration Unit | Production lines, multiple power packs | 2-3 LPM) |
- Filtration Achieved: Down to 1 micron absolute
- Cleanliness Standard: ISO 4406 -/16/13 to -/14/11
- Optional: Vacuum dehydration for water removal
Filtration system for -
Molding Machine
Filtration system for -
Injection Molding Machine
Filtration system for -
Molding Machine
Filtration system for -
Plastics Molding Machine
Filtration system for -
Molding Machine
Filtration system for -
Molding Machine
Filtration system for -
Molding Machine
Filtration system for -
Confectionery industry
Filtration system for -
Rubber Industries
Filtration system for -
Molding Machine
Filtration system for -
MTS Machine
Industries We Serve Across Ahmedabad & Gujarat
From Naroda’s textile mills to Sanand’s automotive plants — we serve Gujarat’s entire industrial spectrum.
| Industry | Ahmedabad / Gujarat Clusters | Our Solution |
|---|---|---|
| Textile Processing | Naroda, Odhav, Vatva | Hydraulic oil filtration for baling presses & stenters |
| Automobile & Auto Components | Sanand, Halol, Hansalpur | Kidney loop for CNC lines, gear oil for test rigs |
| Pharmaceuticals | Sanand GIDC, Changodar | High-cleanliness lubrication for tablet presses & packaging |
| Chemicals & Petrochemicals | Vatva, Nandesari, Dahej | Flameproof filtration for reactor hydraulics |
| Steel & Metal Processing | Odhav, Kutch, Hazira | Gear oil & hydraulic oil for rolling mills |
| Plastics & Packaging | Narol, Bareja, Vatva | Varnish removal for injection moulding machines |
| Power Generation | Captive plants across Gujarat | Turbine oil conditioning, transformer oil filtration |
| Cement | Porbandar, Veraval, Sikka | Gearbox lubrication filtration for mills & kilns |
| Food Processing | Changodar, Kadi | Food-grade lubricant filtration for packaging lines |
1. Cost Reality Check
A mid-sized Ahmedabad textile or engineering unit with 500 litres of hydraulic oil spends ₹60,000 – ₹1,00,000 per oil change. Add disposal costs, downtime, and labour. If they change oil just twice a year, that’s ₹1.5 – 2.5 lakhs annually. A kidney loop filtration system manufactured by us costs a fraction of this over its lifetime — and it keeps oil clean 365 days a year.
2. Production Reliability
In Sanand’s automotive belt, one hour of lost production due to a hydraulic failure can cost several lakhs. Clean oil prevents 80% of hydraulic failures. It’s the cheapest production insurance available.
3. Oil Life Extension
Properly filtered hydraulic oil can last 5-10 years instead of 6-12 months. Gear oil in a well-filtered system can run for decades with top-ups only. The environmental and financial impact is substantial.
4. Machine Life Extension
Pumps, valves, seals, and bearings all last dramatically longer when the oil is clean. Capital replacement costs are deferred. Maintenance teams spend time on preventive work, not firefighting breakdowns.
5. Gujarat’s Regulatory Environment
GPCB (Gujarat Pollution Control Board) increasingly expects industries to minimise waste oil generation. Our filtration systems directly reduce hazardous waste output — helping your compliance standing.
Comparison — Oil Change vs. Oil Filtration System
| Parameter | Frequent Oil Changes | Our Ahmedabad-Manufactured Filtration System |
|---|---|---|
| Annual oil purchase cost | ₹1.5 – ₹6 lakhs+ | Near zero (oil reused) |
| Waste oil disposal | Costly, GPCB compliance burden | Minimal (only spent filter elements) |
| Production downtime | 8-24 hours per change | Zero (kidney loop runs during production) |
| Varnish & micro-contaminants | Never removed | Removed continuously |
| Pump & valve life | Standard wear | Significantly extended |
| Environmental impact | High waste generation | Low waste, sustainable |
| System ROI | No return | Typically 6-18 months payback |
Why Ahmedabad Plants Are Switching to Manufactured Filtration Systems
1. Cost Reality Check
A mid-sized Ahmedabad textile or engineering unit with 500 litres of hydraulic oil spends ₹60,000 – ₹1,00,000 per oil change. Add disposal costs, downtime, and labour. If they change oil just twice a year, that’s ₹1.5 – 2.5 lakhs annually. A kidney loop filtration system manufactured by us costs a fraction of this over its lifetime — and it keeps oil clean 365 days a year.
2. Production Reliability
In Sanand’s automotive belt, one hour of lost production due to a hydraulic failure can cost several lakhs. Clean oil prevents 80% of hydraulic failures. It’s the cheapest production insurance available.
3. Oil Life Extension
Properly filtered hydraulic oil can last 5-10 years instead of 6-12 months. Gear oil in a well-filtered system can run for decades with top-ups only. The environmental and financial impact is substantial.
4. Machine Life Extension
Pumps, valves, seals, and bearings all last dramatically longer when the oil is clean. Capital replacement costs are deferred. Maintenance teams spend time on preventive work, not firefighting breakdowns.
5. Gujarat’s Regulatory Environment
GPCB (Gujarat Pollution Control Board) increasingly expects industries to minimise waste oil generation. Our filtration systems directly reduce hazardous waste output — helping your compliance standing.
Our Manufacturing & Quality Process
You’re welcome to visit our workshop and see your system being built.
Step 1: Consultation & Oil Audit
We discuss your application. If needed, we analyse an oil sample for particle count, water content, and varnish potential.
Step 2: Engineering & Proposal
Our design team creates a system configuration, selects pump and motor specifications, and shares a detailed commercial proposal with technical drawings.
Step 3: Fabrication & Assembly
Skid or trolley is fabricated. Pump, motor, filter housings, valves, piping, and electrical panel are assembled and wired. Every weld and connection is inspected.
Step 4: Factory Acceptance Test
The complete unit is tested with actual oil. Flow rate, pressure drop, filtration efficiency, and electrical safety are verified. You can witness this test.
Step 5: Delivery & Commissioning
System is dispatched to your plant — anywhere in Ahmedabad, Gujarat, or India. Our technician commissions the system and trains your operators.
Step 6: After-Sales Support
Spare filter elements stocked in Ahmedabad. AMC packages available. Technical support via phone, video call, or site visit.
Signs Your Plant Needs an Oil Filtration System
- Hydraulic oil darkens within weeks of a change
- Gearbox oil is black and gritty to touch
- Compressor lubricant smells burnt
- Frequent filter clogging / bypass alarms
- Servo valves or proportional valves stick intermittently
- Pump noise has increased (cavitation)
- Oil analysis reports show high particle counts or water
- You’re changing oil more than once a year
If three or more of these apply, you’re ready for a filtration system.
Key Benefits for Your Plant
- Massive Cost Savings: Reclaiming and cleaning hydraulic oil saves 40% to 60% compared to buying new oil.
- Zero Downtime: Online bypass filtration cleans the oil while the machine continues to run.
- Extended Component Life: Clean oil ensures smoother machine movement and prevents premature wear on hydraulic pumps and valves.
- Ultra-Fine Filtration: The FD/FP series captures impurities down to the sub-micron level, outperforming standard in-line filters.
Frequently Asked Questions
Q1: We are an OEM in Indore. Can you supply filtration systems for our machines?
A: Yes. We regularly work with OEMs in Pithampur and Indore who need integrated or auxiliary filtration for their hydraulic power packs. We can build systems to your specifications and colour, with your branding if required.
Q2: What’s your standard delivery time for an Indore customer?
A: Standard trolley-mount systems (10-30 LPM) are typically ready in 2-3 weeks. Custom-built systems take 4-6 weeks depending on complexity. We also maintain a few standard units ready for immediate dispatch.
Q3: Do you supply spare filter elements?
A: Absolutely. We stock spare filter elements for all our systems, available off-the-shelf from our Indore location. We also supply compatible elements for other brands.
Q4: Can your systems handle high-viscosity oils?
A: Yes. We can design systems for ISO VG 68, 100, 150, and even higher viscosity grades. The pump and motor sizing is adjusted accordingly.
Q5: Do you provide AMC (Annual Maintenance Contract)?
A: Yes, we offer AMC packages for all systems we manufacture. This includes periodic visits, filter element replacement, pump inspection, and performance checks.
Your Oil Is an Asset. Don't Waste It. Clean It
Every litre of hydraulic, gear, or lubrication oil you throw away is money burnt. Every hour of downtime from a contaminated system is profit lost. Our Ahmedabad-manufactured oil filtration systems are designed to stop both — permanently.
Let’s talk about your oil contamination challenges. No hard sales — just a technical discussion with a manufacturer who understands your industry.