Destiny International

ISO CODES- Oil Filtration System -For Servo -Plastic Injection Mouldings - Clean oil has different meanings for different people

The servo valve is the key to the critical tolerance that a machine is designed to operate 24×7 in the harshest conditions. Servo tight tolerances understand the high purity of oil so that the machine can achieve high productivity and performance.

ISO 14/11 (4406:1987) or 17/14/11(iso 4406:1999)is the average wear standard for servo application.

Hydraulic oil testing – Now oil needs to be analyzed monthly initially and thence every quarter. Double-check using monthly patch test method-traditional -Oil testing kit.

Full flow online filters are for handling coarse filtration, closed kidney loop online filtration systems has proven over time continuous achievement of ISO standards required for the servo.

Whether it be Ferromatik Milacron / Windsor / Engel / Desma / Tungyu / Toshiba rubber / plastic injection molding or any power pack with Moog / Hawe / Eaton / Parker servo valves –

Destiny International – filtration solutions are there to achieve ISO code as desired.

As a leading oil filtration machine manufacturer in India our hydraulic oil cleaning machine for any injection molding machine or hydraulic power pack has helped increase performance and prevent inexpensive costs on servo valve purchases.

A tablespoon of dirt in one barrel of oil yields 19 / 17 / 14 ISO code and oil would be considered highly contaminated. Just any hydraulic oil filtration system can not be considered for Servo application.

Most media filters will escape the ultra-fine contaminant unless their efficiency and beta ratio is ascertained.

A portable oil purifier is another support during breakdowns if an online hydraulic oil cleaning system is not dedicated.

 DIFFERENT SERVO VALVES

Picture1 1
Hydraulic Oil Filtration
Picture3 1
Picture4 1
Picture5 1
Picture6 2

        ACHIEVING ISO CODES AND COST SAVING CALCULATION PARAMETERS

CURRENT ISO CODE TARGETED ISO CODECOMPONENT TYPECOMPONENT COSTCOMPONENTPROJECTED YEARS OF SERVICENUMBER OF MACHINESOIL SAVINGTOTAL COST OF FILTRATION EQUIPMENT
  HYDRAULICDIESELGEAR BOX0-X0-X YEARSXXX

 

A dirty machine shop and bad hydraulic oil condition go together.
As a leading hydraulic oil machine manufacturer in India, Destiny International has provided solutions to the worst machine hydraulic oil conditions and work environments.
One of our clients a rubber polymer with multiple plants found a solution with us after watching our machine perform.
Within 3 days 9 Hydraulic oil unit condition was changed to as good as new.
Destiny International is sure to assist you in maintaining your oil.
As a leading hydraulic oil machine manufacturer in India, be assured to solve your dirty hydraulic oil problems.

 

Manufacturer, Supplier & Exporters of Industrial Oil Filtration Systems , Hydraulic Oil Filtration , hydraulic Oil dehydration services

Manufacturer, Supplier & Exporters of Industrial Oil Filtration Systems , Hydraulic Oil Filtration , hydraulic Oil dehydration services

Destiny International is the fastest growing Manufacturer, Supplier Exporters of Industrial Oil Filtration Systems , Hydraulic Oil Filtration , hydraulic Oil dehydration services