Bypass Oil Filtration Units | Destiny International
Bypass Oil Filter System
Bypass Filter System is a bypass oil filtration system that passes only a small portion of the total oil flow through a very dense filter cartridge at about 3 to 4 litres per minute. At this speed, it is possible to remove particles down to 1 micron (3 absolute) and remove 99.95% of all water, greatly decreasing wear and prolonging oil life. Kleenoil can eliminate water and particle contamination, extend oil life up to 5 times and hydraulic oil up to 10 times, reduce engine wear and component wear, dramatically reduce downtime, remove particles down to 1 micron (3 absolute), and is applicable to engines as well as hydraulic systems.
Destiny International filtration unit is made of cast aluminum with a galvanized steel mounting bracket.
There are few basic sizes, which are installed according to the applications.
It is connected to the engine lubricating oil circulating system in a bypass loop using high pressure braided hose and fittings to SAE standards.
We encourage you to get in touch!
If you have any questions or want to talk to us about any of our oil filtration or oil analysis services or products, give us a call
Hydraulic Bypass Filtration Unit
The Hydraulic Bypass Filtration Unit can be fitted as single or multiple units, dependant on the volume of oil in the system. This high pressure oil filter can be fitted on the bypass basis to hydraulic systems, compressors, or any system with oil at pressure up to 3000psi. The flow is controlled to approximately 4 litres per minute at 40psi. This rate is low enough to have negligible effect on most system pressures, yet high enough to ensure that the oil is kept in an as new condition.
Filter Cartridges
The filters for the Destiny International range of products absorb all free and emulsified water and gradually remove contaminant particles down to less than ISO 14/9 or NAS 1638 class 6 equivalent. The filters extend oil life through the removal of the oxidization catalysts and at the same time extend the machine components life.
Benefits of Bypass Oil Filtration Units
Good for the Environment
Because the fluid is being recycled inside of its own application, longer drain intervals can be realized. Oil is a finite resource that one-day will run out. Keeping the fluid running longer reduces the amount of oil you will have to purchase throughout the now extended life of the unit.
Disposing of the used contaminated oil also creates a risk to the environment. Proper disposal methods are needed to safeguard the environment for our children. Reducing the amount of fluid that has to be disposed of is one way of reducing the impact on the already taxed environment.
Whenever a full fluid change is required to be done there is always a risk of spills and ground contamination. Reducing the number of full drains reduce this risk dramatically
Reduces Time Needed for Service
Changing the Destiny International Filter Cartridge requires much less time than what is required to perform a conventional full fluid change. Simply remove the lid from the container, remove the old cartridge and install the new cartridge and seal. All this can be performed in less than 10 minutes and without the worry of spilling oil and disposing of contaminated fluids
Continuous Protection Provided
The Destiny International Bypass Filter System is installed to filter the fluid whenever there is oil pressure. Once the engine or the hydraulic pump is activated and there is fluid pressure, the fluid is continuously passing through the densely wound filter cartridge. The cartridge is wound with pure coniferous long fibre wood pulp paper. This design allows the water to be extracted from the fluid and still allows the larger oil molecules to pass through unchanged. The dirt and wear particles are trapped in the filter giving you a continuous self-contained recycling system
Removes Dirt and Contaminants
Dirt and wear metals will always be present in Hydraulic and Engine oil. The reasons that most fluid changes are done is to get rid of the dirt and contaminants. Conventional fluid filtration components will filter the fluid down to approximately 10-micron in size. Accelerated wear and damage occurs somewhere around 3-6 micron. Using the Destiny International Bypass Filter System you will filter the fluid down to 1-micron in size reducing the chance of wear and ultimately reducing the number of engine failures and rebuilds that would have needed to be performed during the life of the unit.
Desirable Elements Retained
Certain components are purposely placed in lubrication oil to make it effective. Some of the additives include dispersants, detergents, oxidation and rust inhibitors, pour-point depressants, metal de-activators, and anti-foaming and gelling agents. While the Destiny International Bypass Filter System is removing dirt, contaminants, wear metal particles and water; it is not removing the oil additives needed for continued use.
Extends Drain Intervals
Because of the reasons mentioned above, oil can be run longer as it is kept clean, free of water and still maintain its additive package. Proper oil analysis will indicate the life of the oil but on average the drain is extended up to 10 times what it would be without the the Destiny International Bypass Filter System.